MAGNETIC PLATES FOR SHEET SEPARATION

They are used to lift steel sheets from a stack and keep them suspended. The sheets are separated from each other by placing magnetic plates, specially developed for this function, on one or more sides of the stack of sheets.

They are particularly suitable for manual or automatic feeding of machines. Very robust construction based on a stainless steel housing welded to a steel back plate. Each unit can be fixed to the workbench or stand alone.

When the stack of steel sheets is introduced into the magnetic field (on the operating face of the magnet), they immediately take their individual position. The explanation is simple and interesting. Magnetic poles are induced in the steel sheets, and according to the laws of magnetism, like poles repel each other, causing the sheets to separate.

CODE A
mm
B
mm
C
mm
FIXING
HOLES
D
mm
WEIGHT
Kg
20.24.001 75 75 30 2  M-8 50 1,0
20.24.002 275 75 30 2  M-8 250 3,7
20.24.003 340 75 30 2  M-8 250 4,5
20.24.004 105 105 30 2  M-8 50 1,9
20.24.005 210 105 30 2  M-8 100 3,9
20.24.006 310 105 30 2  M-8 200 5,7
20.24.007 340 105 30 2  M-8 250 6,3
20.24.008 145 105 50 2  M-8 100 3,8
20.24.009 210 105 50 2  M-8 100 5,6
20.24.010 280 105 50 2  M-8 200 7,4
20.24.011 310 105 50 2  M-8 200 8,2
20.24.012 345 105 50 2  M-8 250 9,2
20.24.013 410 105 50 3  M-8 150 10,9
20.24.014 445 105 50 3  M-8 150 11,8
20.24.015 510 105 50 3  M-8 200 13,6
20.24.016 610 105 50 4  M-8 150 16,2
20.24.017 765 105 50 4  M-8 200 20,3
20.24.018 280 180 90 2  M-12 200 23,5
20.24.019 400 180 90 3  M-12 150 33,5
20.24.020 345 280 95 3  M-12 100 43,5
20.24.021 545 280 95 4  M-12 150 69,0
20.24.022 610 280 95 4  M-12 150 77,5
20.24.023 815 280 95 4  M-12 200 103,0